[Classicrendezvous] 3-pin Campagnolo?


Example: Production Builders:Tonard

From: "Olof Stroh" <olof.stroh@hem.utfors.se>
To: <Classicrendezvous@bikelist.org>
Date: Mon, 23 Oct 2000 05:53:09 +0200
Subject: [Classicrendezvous] 3-pin Campagnolo?

Newbie to the list I will come back with a short - very short - introduction. Found this list when I posted to questions to the bob list and was directed hither. First one - made actual by the ongoing Campa crank thread - is:

Rummaging a small Stockholm bikeshop couple of weeks ago I found some peculiar Campagnolo cranksets. They look in style like old Nouvo Record, fluted and milled, but with three pins to hold the chain-wheels instead of five and stamped with Campagnolo Strada on the backside. Two sets were just 150mms ( and hadnĀ“t my children bee too old they would have got something very cute ) with double chain-wheels, 45x38 and 42x36: these had normal NR bolts. Two were 170mms for singles, one - that I bought cheap - with just a 36(!)chainwheel, one with an adapter for a double, those had non-countersunk bolts. Bcd - as I measured with a ruler - is 115mm except those on the adapter who are bigger, but still 3-pin.

What is this? Someone knowledgeable, please explain.

Dangerous thing, bike shops.

Olof Stroh
Uppsala Sweden