Re: [CR]List of Items FS

> OK, I'm doing my spring cleaning..... I'm only a few seasons late....
>
> All prices plus shipping/ins. If my pricing is off base and you want to pay
> more let me know...or if my prices are to high I'll be open to your comments
> also. Satisfaction or return for full refund. Trades considered, let me
> know what you have. Specific wants at bottom of page. Thanks for looking.
>
> 1. Cinelli SC or Windsor Pro frameset. This is the one I posted questions
> about some time ago. List members were divided as to which it was. Bike
> had Campy NR and SR on it when I went to buy it, owner stripped and kept
> those items for himself. 50cm, pre-stripped of paint when I purchased it,
> light superficial rust in a few spots here and there including on some of
> the chrome, nothing structual though. Small dent in side of top tube.
> Columbus tubing as indicated by the bird stamped into the headtube. All the
> classic features of the Cinelli/Windsor Pro. Includes frame and fork.
> Obviously a project frame. $55.00
>
> 2. PX-10 wheelset, Normandy gold label Competition w/Maviv eyeletted rims.
> Not bad, not great, certainly need cleaning, re-packing/adjusting and one
> spoke on rear wheel has a little bend in it. Reasonably true though.
> $45.00/set
>
> 3. Super Champion Arc-En_Ciel rim pair, used, 36h, labels still intact and
> pretty nice, old glue on them, straight, pretty shiny and no rust on
> eyelets. $15.00/set
>
> 4. Ukai NOS 36h tubular rim (1), very pretty. $15.00
>
> 5. Wolber GTX clincher rim (1), 32h, grey hard anodized, used but very
> little. $10.00
>
> 6. Mavic Montler Championnat Du Monde, used, 36h rim pair, date stamped
> 0772, labels intact in moderate condition, eyelets have very light
> superficial rust on just a few of them, spoke ends and nipples still in them
> from cutting out hubs (restored them for my PX-10 with some new rims).
> $15.00
>
> 7. Shimano/Rigida rear wheel. Don't know model of hub but has a black clip
> covering an oil port ala Campy NR, 36h. Hub is super smooth, rim looks like
> Rigida 1320 but has a dent in it - not usable in my opinion. $5.00 and I'll
> cut the rim off if you want to save on shipping.
>
> 8. NOS Normady Sport front hub, high flange, 36h, solid axle, 3 available,
> $8.00ea or $20.00 all 3
>
> 9. NOS Suntour small flange front hub, 36h, date stamped 6 84, model as
> stamping is faint, looks like"OYROmoste"? hollow axle, seems nice quality.
> $15.00
>
> 10. Shimano 333 high flange front hub, used, solid axle. $3.00
>
> 11. Sunshine small flange rear, NOS, 40h, hollow axle, 2 available.
> $15.00ea or $22.50 for both
>
> 12. Shimano 105, 36h, cassette type, used but almost un-noticable, super
> smoooooth. $15.00
>
> 13. 3ttt old Record stem as used on Raleigh Pro's, 95mm, no decals but nice
> otherwise. $20.00
>
> 14. NOS TA metal dustcap set. $10/set
>
> 15. NOS Nervar steel three arm RH crank. $10.00
>
> 16. New Michelin Axiel Select 700x23, foldable, black and tan with a thin
> red stripe, rides great and looks super on a white PX-10 (it's what I have
> on mine), lists at $34ea new, $25/set.
>
> 17. Ciclolinea yellow with little speckles, cork tape, new in box. $4.00
>
> 18. Simplex seatpost, unusual, I think early/mid 80's. 26.4 (would like to
> trade for a 26.6), post and top part look like a Campy SR from side profile
> but the Simplex micro adjust is featured with a single horizontal bolt.
> Very nice design. I believe it is NOS. $45.00
>
> 19. Mafac used brake lever set with excellent black full hoods, includes a
> NOS set of levers also. $30.00
>
> 20. QR's: (1) MM Atom straight, very good chrome, lever end only; (1) same
> but complete unit for rear, chrome needs cleaning but should polish up
> nicely with solid metal end as used on Motobecanes of mid 70's; (1) set
> front and rear MM Atom curved lever complete units with metal and plastic
> ends as used on many mid 70's Peugeot PX-10's. All $20.00
>
> 21. Partial used early Shimano 600 group. The ones with the very ornate
> engraving. Includes brakes levers with gum hoods just beginning to show
> dryness but still good looking, clamp on shift levers, front and rear
> derailleurs. I think these are the prettiest Japanese components made.
> Intended for a project but just to many of them so time to limit how many
> "project" items I'm going to save stuff for. $40.00 everything
>
> 22. GB nutted stem (95mm), GB plain handlebar, 40 e-e, Weinmann levers with
> the hard rubber type white hoods, ala Raleigh mid to upper end of 70's.
> $20.00
>
> 23. NOS Nitto Olympiade drop bar, 25.16 clamp area, 39.5 e-e. $25.00
>
> 24. NOS SR World Randonneur drop bar, 25.56 clamp area, 44.5 e-e. $20.00
>
> 25. NOS Atax Philippe, Franco Italia, wonderful engraving of bike racer and
> laurel wreath, perfect to replace AVA junk on your PX-10 or French bike.
> Holes for areo levers but these coverup with normal levers. 25.36 clamp
> area and 42.5 e-e. Great bars! $35.00
>
> 26. ATAX front hub wing nuts, used but neat aluminum casting very retro.
> $10.00
>
> 27. Just curious - any market for Shimano Biopace chanrings???????
>
> Want (must be mint):
> 105mm late 70's 3ttt Record stem, similar to Cinelli 1a style
> (1) Mavic Mod E2 700 36h rim
> (2) Rigida 1319 or 1320 36h rims
> Campy NR 1978 crank arm set
> Campy NR rear derailleur, "Patent 78"
> Campy NR rear derailleur, "Patent 74"
> Campy NR front solid cage with lip
>
> Trade:
> TA Cyclotourist 170 crankset with Phil BB (English) for a Campy NR crankset,
> pre 1978, nice used ok