Re: [CR]TA adaptor Ring

(Example: Framebuilders:Alberto Masi)

Date: Tue, 12 Dec 2000 10:42:01 -0800
To: Jerry Moos <moos@penn.com>, John Swarbrick <johnswarbrick@hotmail.com>
From: "Joseph Bender-Zanoni" <jfbender@umich.edu>
Subject: Re: [CR]TA adaptor Ring
Cc: classicrendezvous@bikelist.org
In-Reply-To: <3A36464B.16FA2E54@penn.com>
References: <F151P4j7s8fa0P5DmdK00014e52@hotmail.com>


I thought they might be called a TA Criterium. I just measured the ones I have and they are 151mm.

Joe Bender-Zanoni Foot of snow in A^2

At 10:37 AM 12/12/00 -0500, Jerry Moos wrote:
>If you have the ones I think, I believe they were called TA Competitions. Mike Kone sold
>the adapters and rings in his recent closeout sale and maybe sold any left over at
>VeloSwap. I bought a couple of sets of adapter and rings in the sale, and can check them
>for you if you have some specific questions. I think maybe the smallest ring available
>for this adapter was 44T, like the old pre-NR Campy Record, but I don't know if the bolt
>circle was 151 or something slightly different - guess I should measure it. I think I've
>seen photos of Beryl Burton using these cranks in the 50's or 60's.
>
>Regards,
>
>Jerry Moos
>
>John Swarbrick wrote:
>
>> Hello all.
>>
>> Firstly please let me appologize for my earlier question in HTML
>> sorry!!
>>
>> Ok,
>>
>> Thanks for all the answers on my TA cranks.
>>
>> I also have a TA adaptor ring which fits the Cyclo Touriste crank family.
>>
>> The question is what 6 pin rings fit this adaptor?
>>
>> I guess that TA produced this as there bigger Rings have a bit of a tendancy
>> to flex.
>>
>> Cheers,
>>
>> John.