[CR]List of Items FS

(Example: Framebuilding:Restoration)

From: "Eric Elman" <tr4play@home.com>
To: <Classicrendezvous@bikelist.org>
References: <l03130302b658156c26b7@[216.144.8.137]> <v04210132b65868389326@[10.0.1.5]>
Subject: [CR]List of Items FS
Date: Sat, 9 Dec 2000 22:01:20 -0600


OK, I'm doing my spring cleaning..... I'm only a few seasons late....

All prices plus shipping/ins. If my pricing is off base and you want to pay more let me know...or if my prices are to high I'll be open to your comments also. Satisfaction or return for full refund. Trades considered, let me know what you have. Specific wants at bottom of page. Thanks for looking.

1. Cinelli SC or Windsor Pro frameset. This is the one I posted questions about some time ago. List members were divided as to which it was. Bike had Campy NR and SR on it when I went to buy it, owner stripped and kept those items for himself. 50cm, pre-stripped of paint when I purchased it, light superficial rust in a few spots here and there including on some of the chrome, nothing structual though. Small dent in side of top tube. Columbus tubing as indicated by the bird stamped into the headtube. All the classic features of the Cinelli/Windsor Pro. Includes frame and fork. Obviously a project frame. $55.00

2. PX-10 wheelset, Normandy gold label Competition w/Maviv eyeletted rims. Not bad, not great, certainly need cleaning, re-packing/adjusting and one spoke on rear wheel has a little bend in it. Reasonably true though. $45.00/set

3. Super Champion Arc-En_Ciel rim pair, used, 36h, labels still intact and pretty nice, old glue on them, straight, pretty shiny and no rust on eyelets. $15.00/set

4. Ukai NOS 36h tubular rim (1), very pretty. $15.00

5. Wolber GTX clincher rim (1), 32h, grey hard anodized, used but very little. $10.00

6. Mavic Montler Championnat Du Monde, used, 36h rim pair, date stamped 0772, labels intact in moderate condition, eyelets have very light superficial rust on just a few of them, spoke ends and nipples still in them from cutting out hubs (restored them for my PX-10 with some new rims). $15.00

7. Shimano/Rigida rear wheel. Don't know model of hub but has a black clip covering an oil port ala Campy NR, 36h. Hub is super smooth, rim looks like Rigida 1320 but has a dent in it - not usable in my opinion. $5.00 and I'll cut the rim off if you want to save on shipping.

8. NOS Normady Sport front hub, high flange, 36h, solid axle, 3 available, $8.00ea or $20.00 all 3

9. NOS Suntour small flange front hub, 36h, date stamped 6 84, model as stamping is faint, looks like"OYROmoste"? hollow axle, seems nice quality. $15.00

10. Shimano 333 high flange front hub, used, solid axle. $3.00

11. Sunshine small flange rear, NOS, 40h, hollow axle, 2 available. $15.00ea or $22.50 for both

12. Shimano 105, 36h, cassette type, used but almost un-noticable, super smoooooth. $15.00

13. 3ttt old Record stem as used on Raleigh Pro's, 95mm, no decals but nice otherwise. $20.00

14. NOS TA metal dustcap set. $10/set

15. NOS Nervar steel three arm RH crank. $10.00

16. New Michelin Axiel Select 700x23, foldable, black and tan with a thin red stripe, rides great and looks super on a white PX-10 (it's what I have on mine), lists at $34ea new, $25/set.

17. Ciclolinea yellow with little speckles, cork tape, new in box. $4.00

18. Simplex seatpost, unusual, I think early/mid 80's. 26.4 (would like to trade for a 26.6), post and top part look like a Campy SR from side profile but the Simplex micro adjust is featured with a single horizontal bolt. Very nice design. I believe it is NOS. $45.00

19. Mafac used brake lever set with excellent black full hoods, includes a NOS set of levers also. $30.00

20. QR's: (1) MM Atom straight, very good chrome, lever end only; (1) same but complete unit for rear, chrome needs cleaning but should polish up nicely with solid metal end as used on Motobecanes of mid 70's; (1) set front and rear MM Atom curved lever complete units with metal and plastic ends as used on many mid 70's Peugeot PX-10's. All $20.00

21. Partial used early Shimano 600 group. The ones with the very ornate engraving. Includes brakes levers with gum hoods just beginning to show dryness but still good looking, clamp on shift levers, front and rear derailleurs. I think these are the prettiest Japanese components made. Intended for a project but just to many of them so time to limit how many "project" items I'm going to save stuff for. $40.00 everything

22. GB nutted stem (95mm), GB plain handlebar, 40 e-e, Weinmann levers with the hard rubber type white hoods, ala Raleigh mid to upper end of 70's. $20.00

23. NOS Nitto Olympiade drop bar, 25.16 clamp area, 39.5 e-e. $25.00

24. NOS SR World Randonneur drop bar, 25.56 clamp area, 44.5 e-e. $20.00

25. NOS Atax Philippe, Franco Italia, wonderful engraving of bike racer and laurel wreath, perfect to replace AVA junk on your PX-10 or French bike. Holes for areo levers but these coverup with normal levers. 25.36 clamp area and 42.5 e-e. Great bars! $35.00

26. ATAX front hub wing nuts, used but neat aluminum casting very retro. $10.00

27. Just curious - any market for Shimano Biopace chanrings???????

Want (must be mint): 105mm late 70's 3ttt Record stem, similar to Cinelli 1a style (1) Mavic Mod E2 700 36h rim (2) Rigida 1319 or 1320 36h rims Campy NR 1978 crank arm set Campy NR rear derailleur, "Patent 78" Campy NR rear derailleur, "Patent 74" Campy NR front solid cage with lip

Trade: TA Cyclotourist 170 crankset with Phil BB (English) for a Campy NR crankset, pre 1978, nice used ok