Re: [CR]Unicanitor saddle

(Example: Component Manufacturers:Ideale)

From: <Roadgiant@cs.com>
Date: Thu, 21 Dec 2000 17:27:31 EST
Subject: Re: [CR]Unicanitor saddle
To: Ebbikes@aol.com, peterg@ixpres.com, classicrendezvous@bikelist.org


Ditto on the ratcheting 10mm Sears wrench for the two bolter. Works very well. I also use an offset Sears wrench to do the front bolt. About ten minutes.

Scott