Re: [CR]Wheel Size for Juvenille Peugot

(Example: Framebuilding:Brazing Technique)

In-Reply-To: <3ACB69DA.BBE7FC95@fridayscomputer.com>
References: <3ACB330A.16457E00@fridayscomputer.com> <v04210128b6f0e88d388b@[10.0.1.4]>
Date: Wed, 4 Apr 2001 16:36:35 -0400
To: Steve Freides <steve@fridayscomputer.com>
From: "Sheldon Brown" <CaptBike@sheldonbrown.com>
Subject: Re: [CR]Wheel Size for Juvenille Peugot
Cc: Classic Lightweights <Classicrendezvous@bikelist.org>


At 2:37 PM -0400 4/4/01, Steve Freides wrote:
>Very good. Are decent tires also available in this size? I recall my last
>search for road-worthy tires for my wife's 540mm wheeled Terry Moo turned up
>very little except some very heavy wheelchair tires. I guess I should also
>ask: Are the rims are of reasonably light weight, too? Can beggars be
>choosers?

The rims are 500 grams on my scale, Rigida simple channel aluminum rims, similar to the old Weinmann 210. 36 holes $19.95 each.

There are a fair range of tires available in this size, including very light wheelchair basketball tires.

I've got a line on some slicks for your wife's 507 rims...
>Any guesses as to the approximate vintage of the bike? No decals about
>tubing, no serial number on BB shell, just lots of Peugot stickers. Stamped
>dropouts.

Could be '60s, could be '80s. This sort of bike is quite common in France, usually as a one or 3-speed.
>
>Anything special to use in terms of hubs for period correctness?
>
>What are the period-correct front and rear OLD size?

Could be pretty skinny, they had different standards for juvenile sizes. I don't think this is worth worrying about "period correctness" because it's not rare nor high end (though uncommon _this_ side of the Pond.)

Could probably dig up some recycled Normandys, even so you'll still probably have to spread the frame & fork, maybe also file the dropouts.

All the best,

Sheldon


>
>-
>
>Sheldon Brown wrote:
>>
>> Quoth Steve Freides:
>>
>> >I picked up a 24" wheel sized Peugot frame from a fellow list member.
>> >
>> >It's either for 540 or 547 wheels/tires but I'm not sure which. Would
>> >anyone know which is best for this frame? We know it's 24 x 1-3/8".
>> >Sheldon's web site says:
>> >
>> > 24 x 1 3/8 (S-5) 547 mm Schwinn Juvenile lightweights
>> > 24 x 1 3/8 (E-5) 540 mm British Juvenile, most wheelchairs
>>
>> The 540 size is also French 600A, which is certainly what this bike
>> was made for. We've got rims...
>>
>> Sheldon "Roues Et Jantes" Brown
>> Newtonville, Massachusetts
>> +----------------------------------------------+
>> | Music expresses that which cannot be said |
>> | and on which it is impossible to be silent. |
>> | --Victor Hugo |
>> +----------------------------------------------+
>> Harris Cyclery, West Newton, Massachusetts
>> Phone 617-244-9772, 617-244-1040, FAX 617-244-1041
>> http://harriscyclery.com
>> Hard-to-find parts shipped Worldwide
>> http://captainbike.com
>> Useful articles about bicycles and cycling
>> http://sheldonbrown.com
>
>--
>Steve Freides

Harris Cyclery, West Newton, Massachusetts Phone 617-244-9772, 617-244-1040, FAX 617-244-1041
            http://harriscyclery.com
       Hard-to-find parts shipped Worldwide
            http://captainbike.com
    Useful articles about bicycles and cycling
            http://sheldonbrown.com