[CR]Re: Classicrendezvous digest, Vol 1 #645 - 25 msgs

(Example: Production Builders)

From: <REClassicBikes@aol.com>
Date: Tue, 3 Jul 2001 11:16:14 EDT
To: classicrendezvous@bikelist.org
Subject: [CR]Re: Classicrendezvous digest, Vol 1 #645 - 25 msgs

In a message dated 7/3/01 04:05:14 GMT Daylight Time, classicrendezvous-request@bikelist.org writes:

<< TW406@aol.com >>

Nitto manufacture a tool for the "springing" of stems. Try lubricating with a water based lubricant. This is so you can wash it out before you slide it on to the centre, it is difficult to fully remove oil based lubricant afterwards and you may have problems with the bars slipping.

Regards
Martin Coopland