[CR]Nutz to allen key conversion (Was Nutty superbe..)

(Example: Books)

From: <OROBOYZ@aol.com>
Date: Fri, 6 Jul 2001 09:23:55 EDT
To: MSCTROSE@aol.com, Gjvinbikes@aol.com, classicrendezvous@bikelist.org
Subject: [CR]Nutz to allen key conversion (Was Nutty superbe..)

In a message dated 7/6/01 12:37:25 AM Eastern Daylight Time, MSCTROSE@aol.com writes:

<< Anybody have any ideas on how to make this brake center bolt an allen instead of a hex attachment? Some one gave me the idea to sand off the chrome, then run a five by 1 mm die over the center bolt to thread it down further, then cut off the excess. >>

You don't have to sand off the chrome.. Just use a lot of tapping lubricant.. That's the way it was done BEFORE allen keyed brakes were common! I tapped and shortened many Campag center bolts in the olde days!

The only other way of course is to replace the center bolt altogether.

Dale Brown cycles de ORO, Inc. 1410 Mill Street Greensboro, North Carolina USA 27408 336-274-5959 Fax 336-274-6360 <A HREF="http://www.cyclesdeoro.com">cyclesdeORO.com</A> <A HREF="http://www.classicrendezvous.com/main.htm">Classic Rendezvous</A>