Re: [CR]Giordana, seat post size & micro-adjust seat posts...

(Example: Production Builders:Peugeot)

From: "walter skrzypek" <wspokes1@hotmail.com>
To: classicrendezvous@bikelist.org, OROBOYZ@aol.com
Subject: Re: [CR]Giordana, seat post size & micro-adjust seat posts...
Date: Fri, 02 Nov 2001 09:21:04 -0500


Good point below Dale, Catch this problem early!
>You likely have slight jetsam and flotsam left in the interior.. we had a guy on our group rides with slight jetsam and flotsam leaving the exterior...nobody wanted to ever ride behind him! ------------------------------------------

Walt "just had to say it"&nbsp;Skrzypek Falls Creek, PA

&gt;From: OROBOYZ@aol.com

&gt;To: classicrendezvous@bikelist.org

&gt;Subject: [CR]Giordana, seat post size &amp; micro-adjust seat posts...

&gt;Date: Thu, 1 Nov 2001 20:46:48 EST

&gt;

&gt;In a message dated 11/1/2001 7:15:32 PM Eastern Standard Time,

&gt;rabbitman@mindspring.com writes:

&gt;

&gt;&lt;&lt; but a Giordana lugged steel, made by Tomessini &gt;&gt;

&gt;

&gt;Garth:

&gt;Those bikes were always made by Belato, said to be the ex-head builder at

&gt;Pinarello. He also made recent Marins, early to mid Greg LeMonds(as did

&gt;Scapin.) and who knows who else's bikes!

&gt;

&gt;&lt;&lt;...did Raleigh possibly order 531-C tubing in a 27.0 seat tube size? My

&gt;80's Raleigh seems to have a shade more than usual resistance to a 27.2 post

&gt;even when greased. The collar has definitely never suffered from

&gt;overtightening, nor is there excess flashing on the lug that might cause a

&gt;bit of binding. 27.2 seat posts still slide in and out with a firm twisting

&gt;hand, but it doesn't go like butter. Would 27.0 be a better fit, or should I

&gt;not even try, if 27.2 is still very workable? &gt;&gt;

&gt;

&gt;Sounds like you need a proper reaming! If the 27.2 goes in, that is the

&gt;correct size. Bring it to cycles de ORO (if you don't mind the 18 hour drive

&gt;or whatever) and I will gently size that frame so the seat post slides in

&gt;smoothly.

&gt;Not an unusual situation for a production bike...

&gt;

&gt;BTW, the old two bolt Campy seat pins work like a dream in terms of

&gt;microadjusting.. nothing better. Just get a 10 mm box combo wrench from Sears

&gt;and adjust without bending the saddle flap. The Campy tool for this purpose

&gt;stinks.

&gt;

&gt;My 2 cents....

&gt;

&gt;

&gt;

&gt;Dale Brown

&gt;Greensboro, NC

&gt;_______________________________________________

&gt;Classicrendezvous mailing list

&gt;Classicrendezvous@bikelist.org

&gt;http://www.bikelist.org/mailman/listinfo/classicrendezvous