Re: [CR]25.0 mm post for Vitus

(Example: Production Builders:Cinelli:Laser)

From: <Gjvinbikes@aol.com>
Date: Mon, 5 Nov 2001 15:19:45 EST
Subject: Re: [CR]25.0 mm post for Vitus
To: classicrendezvous@bikelist.org


In a message dated 11/5/01 2:03:20 PM Eastern Standard Time, velo531@hotmail.com writes:


> I think a few of the new suspension posts use 25.0 as the
> base size and then sell shims to match larger diameters.

As of model year 2000, anyway, the only suspension seat posts I can find that have 25.0 models are the Moxey ones, out of the Hawley's catalog (very heavy and Very Expensive). Tamer, Post Moderne, Cane Creek's Thudbuster and all the others I can find are all starting at 25.4 minimum.

Note that if the frame for which he needs the seat post has a "classic" fit, the Moxey might not fit low enough into the seat tube to let him reach his pedals !

A previous poster suggested the Kalloy UNO models might have a 25.0 diameter post available, but I find that only the Laprade model does, none of the UNO's going below 25.4. It is disheartening to a neo-Francophile to find that not even the bare aluminium seat post w/o clamp comes in less than 25.4 anymore.

Glenn Jordan - Durham, NC