RE: [CR]Vitus post

(Example: Framebuilding:Restoration)

From: "David Bilenkey" <dbilenkey@sympatico.ca>
To: <ABikie@aol.com>, <moos@penn.com>, <Sid_Smith@baxter.com>
Cc: <classicrendezvous@bikelist.org>
Subject: RE: [CR]Vitus post
Date: Sat, 10 Nov 2001 14:26:03 -0500
In-Reply-To: <22.1e9a753b.291ed696@aol.com>


There's a Dura Ace one on eBay at the moment. Not a classic, but a nice post.

http://ebay.com/<blah>

David Bilenkey in cool and wet Ottawa
> -----Original Message-----
> From: classicrendezvous-admin@bikelist.org
> [mailto:classicrendezvous-admin@bikelist.org]On Behalf Of ABikie@aol.com
> Sent: November 10, 2001 2:15 PM
> To: moos@penn.com; Sid_Smith@baxter.com
> Cc: classicrendezvous@bikelist.org
> Subject: Re: [CR]Vitus post
>
>
> In a message dated 11/10/01 1:43:35 PM Eastern Standard Time,
> moos@penn.com
> writes:
>
>
> > 25.0 mm was sort of a defacto
> > standard used but ALAN, Vitus, and if I recall correctly,
> Graftek as well.
> > Campy, Gippieme, Zeus, and many others made 25.0 posts for these frames.
> > There must still be quite a few around.
> >
>
> Minor clarification:
> Graftek posts were 27 point something on the top, turned down to
> 23.8 to go
> into the hollowed pencil
> As far as 25's go, I have or have seen avocet, SR, Campy nuovo, Super, C
> Record (and possibly other aero cousins)
>
> If you need one and can't find it, I'll look.
>
> Larry