Re: [CR]Re using lugs

(Example: Production Builders:Teledyne)

From: "renaissance-cycles" <info@renaissance-cycles.com>
To: <REClassicBikes@aol.com>, <classicrendezvous@bikelist.org>
References: <68.17826df6.292d0c1c@aol.com>
Subject: Re: [CR]Re using lugs
Date: Thu, 22 Nov 2001 02:05:36 +0100


Sounds like the tubes are going to end up in the can!..So why worry about messing around, just chop the frame up and remove the lugs as you please. More that 2 ways to skin a chicken!..............Or am I missing something!

BC Baron Corpuz...........Holland. Going to digg around in an old shop on turkey day!!


----- Original Message -----
From: REClassicBikes@aol.com
To: classicrendezvous@bikelist.org
Sent: Wednesday, November 21, 2001 2:54 PM
Subject: [CR]Re using lugs



> The idea of warming the lugs out of old frames and re using them is possible
> and has been tried by one or two people, but I would not recommend it, it
> takes a lot of heat to pull four tubes out of a bb shell and the seat lug
> does not like it either!
>
> Regards
> Martin, training in the rain again, Coopland (but going to the gent six
this

> weekend)