Re: [CR]Wheel Question

(Example: Component Manufacturers:Avocet)

From: <>
Date: Sat, 8 Dec 2001 19:11:42 EST
Subject: Re: [CR]Wheel Question

In a message dated 12/8/01 3:30:25 PM Eastern Standard Time, writes:

> Can the wheel be easily redished or does it need to be
> disassembled and respoked?

If you can turn the nipples on the left (non-drive-side) the wheel can be redished.

The difference in the spoke lengths for 120 compared to 126 is no more than one mm I bet...let me check...yes, its on the order of 1/4 mm ideal spoke length differences if you go from 126 to 120 with a Campy hi-flange hub. I bet turning the left-side nipples 2 or 3 whole turns while backing off the right-side nipples one turn (if wheel is already nearly tight enough) would take care of the re-dish.

Glenn Jordan - Durham, NC (Aaron and I got caught out in the warm dark this evening while riding home from Raleigh - thinking of "vintage" light systems as a result !)