Re: [CR]Maillard 700 Hub question--Whitworth

(Example: Production Builders:LeJeune)

Date: Tue, 4 Dec 2001 09:08:37 -0800 (PST)
From: "Tom Dalton" <>
Subject: Re: [CR]Maillard 700 Hub question--Whitworth
To: jack taylor <>
In-Reply-To: <>

My recollection is that the rear 700 hub had some kind of super-fine thread rather than the standard 1-mm pitch or the Campy 26 tpi pitch. I would be surprised if the spec. is Whitworth. More likely it is .75 mm or .8mm or some non-standard metric spec. I have only seen such an axle on that particular model of hub.

--- jack taylor wrote:

> Howdy,
> I took the Meral in yesterday to have the fender
> stays cut and swap out
> free-wheels since I didn't have a Atom freee wheel
> tool. In switching the
> freewheel, we had to disassemble the hub partly
> because of the whacky
> dustcaps that are integrated into the cones. The
> strange thing: the
> locknuts appeared to be a weird size--Whitworth,
> according to renown Chicago
> bike guy Moss Jacobs. Could this be right? Could
> these be OEM or, perhaps,
> the fellow from whom I bought the hubs rebuilt them
> this way?
> Your thoughts.
> Regards,
> John Taglia
> running late in Chicago
> _________________________________________________________________
> _______________________________________________
> Classicrendezvous mailing list

__________________________________________________ Do You Yahoo!? Buy the perfect holiday gifts at Yahoo! Shopping.