Re: [CR]lug production


Example: Framebuilders:Chris Pauley

From: "Donald Dundee" <rebour@hotmail.com>
To: davebohm@home.com, classicrendezvous@bikelist.org
Subject: Re: [CR]lug production
Date: Wed, 28 Feb 2001 11:31:08 -0500


My 1936 Caminargent has fully cast, single piece mole, aluminum lugs, produced in multiple batches using the lost-wavx technique. This process was (as you succintly implied) was an extremely high tolerance method of casting that was commonly used in the production of metal-cast (bronze, gold, etc) artwork (sculptures, etc) jewelry (rings, watch cases, etc.)

Investment cast bicycle lugs are produced in a similar fashion to extremely high tolerances. the details of which i will leave to others on thie list (I hope) to describe. I would like to know who came first in this process as it applies to bicycle lug production: Masi, Cinelli, who?

Points off if you don't site references.

ken denny Boston


>From: "dave bohm" <davebohm@home.com>
>To: <classicrendezvous@bikelist.org>
>Subject: [CR]lug production
>Date: Tue, 27 Feb 2001 20:40:02 -0700
>
>SNIP SNIP
>One last question. Was Masi really the first company to make a investment
>cast luged frame? Did no one do it before, even on a small scale? Maybe
>Hetchins etc? I would be interested in finding out.

>

>Dave Bohm

>Bohemian