FW: [CR]RE: Classicrendezvous digest, Vol 1 #276 - 18 msgs


Example: Events:Cirque du Cyclisme:2004

Date: Fri, 02 Feb 2001 17:58:48 +0000
Subject: FW: [CR]RE: Classicrendezvous digest, Vol 1 #276 - 18 msgs
From: Bob Reid <bob.reid1@virgin.net>
To: <classicrendezvous@bikelist.org>
In-Reply-To: <B6A09E49.53B9%bob.reid1@virgin.net>


---------- From: Bob Reid <bob.reid1@virgin.net> Date: Fri, 02 Feb 2001 17:26:33 +0000 To: Jim Cunningham <cyclartist@home.com> Subject: Re: [CR]RE: Classicrendezvous digest, Vol 1 #276 - 18 msgs

I'd like to add to Jim's comments in that the whole aspect of decals is one area best left to the pro's - In the UK, Nick Tithecott at H.Lloyds will gladly reproduce almost any decals you like - better still if you have original copies he can work from if he doesn't have them already. I wouldn't know if he's cheaper than Jim / Cyclart though his work is good and the costs are fairly low even for one-off design work (he achieves this by buying time on a professional decal printing machine apparently). Nice guy to deal with, just pressured from a lot of orders and a lack of time !

Bob Reid Stonehaven Scotland
> From: "Jim Cunningham" <cyclartist@home.com>
> Date: Fri, 2 Feb 2001 07:58:33 -0800
> To: <classicrendezvous@bikelist.org>
> Subject: [CR]RE: Classicrendezvous digest, Vol 1 #276 - 18 msgs
>
> Russell & CR Listies,
>
> Since 1976 CyclArt has invested in the artwork and printing of thousands of
> different designs so that we can accurately refinish vintage bicycle frames.
> Even with our experience and specialized equipment it's not a simple task.
> There are several techiniques and it would take a small book to completely
> describe them all.
>
> Please consider a professional refinish or touch up from CyclArt with
> accurate replacement decals. That's why we're here!
>
> JFC ~ CyclArtist
> Vista, CA
>
>
> Message: 5
> Date: Wed, 31 Jan 2001 20:49:52 -0800 (PST)
> From: Russell roth <fuzzybunnies@pot.com>
> To: classicrendezvous@bikelist.org
> Reply-To: fuzzybunnies@pot.com
> Subject: [CR]decals
>
> I was wondering if anyone can tell me how to reproduce decals. I have decals
> for a raleigh international and would like to produce copies for any
> additional projects that pop up in the future, like hopefully a pro frame.
> The set I have is designed to do a pro, international or comp GS as it has
> all three frame names but only enough of the rest of the decals to do one
> frame. I believe they're water transfers since after you apply a sticker the
> front paper won't come off unless you apply lots of water. Anyone done this
> before?. Thanx in advance. -Russell