Re: [CR]New/Old Campy QR skewer

(Example: Production Builders:Peugeot)

From: "renaissance-cycles" <info@renaissance-cycles.com>
To: <NortonMarg@aol.com>, <classicrendezvous@bikelist.org>
References: <122.c8f4b3c.29a41689@aol.com>
Subject: Re: [CR]New/Old Campy QR skewer
Date: Tue, 19 Feb 2002 23:12:36 +0100


Steve:

Campagnolo did issue the later NR hubset with a 130! I don't know if it made it State-side but for sure it is here.............I have NOS hubsets straight out of the box with a 130 and they are marked as is.........I only found this out as I was trying to swap out a 120 for a 126........But it was to long?? So I checked it and indeed it was 130mm............All 20 hubsets are like this!!

My problem though, they are all French thread!!......Sorry no spare 130mm QRs!! No idea if the old and new will work together.....Good luck.

BC Baron Corpuz..................and the gang!!........in the pitt of holland......Eindhoven!!


----- Original Message -----
From: NortonMarg@aol.com
To: classicrendezvous@bikelist.org
Sent: Tuesday, February 19, 2002 9:58 PM
Subject: [CR]New/Old Campy QR skewer



> Does anyone know if the campy 8 speed (or other 130) skewer rod will work
> with the NR/SR curved QR lever and end piece? I'm building a couple of 7spd
> 130 wheels for my pre 1984 bikes to get less dish and to not bend/break
> axles. Any body have any for sale? Are the 130 axles 10 x 26? I could use
> some of those too.
> Stevan Thomas
> Alameda, CA