Re: [CR]Centerpull brakes

(Example: Component Manufacturers:Campagnolo)

Date: Sat, 09 Mar 2002 00:07:10 -0800
From: "Chuck Schmidt" <chuckschmidt@earthlink.net>
To: classicrendezvous@bikelist.org
Subject: Re: [CR]Centerpull brakes
References: <3.0.32.20020306150814.006a192c@pop.tiac.net>


Bicycle Classics inc wrote:
>
> My vote for an older Hetchins is Mafac. Hetchins sold bare frames, and
> Mafac parts were very common in the UK from what I understand. A typical
> 60's or early 70's Dural Forge model (OK, even the Racers) can be set up to
> stop like crazy. Its a bit hard to get them not to squeek.
>
> With soft original MAFAC pads I've ridden bikes with Mafac centerpulls that
> seem to have worlds more stopping power than Campy sidepulls. I ride a bit
> here in Colorado on dirt mountain descents where speed build ups are a
> problem - lots of switchbacks and all sorts of nastiness - and a bike set
> up with Mafacs just gives a lot of confidence. But - if you use those
> no-name Mafac look alike pads that melt under heat, then you will certainly
> perish. Mike "once scrapped an entire brake pad off a rim" Kone

I agree! I have MAFAC Forge Durals on my '54 Hetchin's Vade Mecum and they work great. Weird part is that they don't have the Mafac squeek. In a vintage context they are super stoppers!

Chuck Schmidt
South Pasadena, Southern California