Re: [CR]Installing Regina asymmetrical chains like the "CX-S"

(Example: Component Manufacturers:Campagnolo)

Date: Mon, 8 Jul 2002 14:20:33 -0700 (Pacific Daylight Time)
From: "Marc Boral" <mbikealive@dslextreme.com>
References: <192.971d7e7.2a5b4f1e@cs.com>
To: <classicrendezvous@bikelist.org>
Subject: Re: [CR]Installing Regina asymmetrical chains like the "CX-S"


Yes Greg, the installation is the way you describe.

Marc Boral Long Beach, CA

-------Original Message-------

From: GPVB1@cs.com Date: Monday, July 08, 2002 13:25:49 To: classicrendezvous@bikelist.org Subject: [CR]Installing Regina asymmetrical chains like the "CX-S"

All:

OK, Regina Catena-philes, could someone remind me which way to install the non-symmetrical Regina narrow chains? I'm guessing that the black "B"-shaped

link goes on the inboard side with the flat edge away from the sprocket teeth, but I can't recall for sure if that 's correct or not.... Also, the CX-S has both inners asymmetrical, whereas the "America" or "Anniversario" has only one side's inner link that's that way.

Thanks,

Greg "this mid-'80s stuff is so new" Parker A2 MI USA

_______________________________________________

.