Re: [CR]A rattling in my fork

Example: Humor:John Pergolizzi

From: "Rick Chasteen" <>
To: "David Bilenkey" <>, "Classicrendezvous" <>
References: <>
Subject: Re: [CR]A rattling in my fork
Date: Tue, 22 Jan 2002 10:49:36 -0600

How about Frame Saver? That should encapsulate it at the bottom of the fork blade if you let it cure right side up.

Rick Chasteen, Kansas City

----- Original Message -----
From: David Bilenkey
To: Classicrendezvous
Sent: Tuesday, January 22, 2002 10:39 AM
Subject: [CR]A rattling in my fork

> I'm hoping the list members might have discovered a good solution to this
> problem I've got. A fork on an older frame I picked up last night has
> something rattling around inside one of the blades. This is a fork of
> unknown origin, but is made with 4130 Cro-Moly with a pleasant full sloping
> crown. Currently painted black (although shortly to be repainted) and has
> vent holes at the top and bottom of the blades.
> I tried pouring linseed oil into the blades in the hopes that the oil might
> trap the debris (it sounds like a single large 'pebble' as opposed to a
> bunch of rust flakes) once the oil dried out, but so far no success (it may
> not have dried enough yet).
> Any other ideas?
> David Bilenkey
> Ottawa, Ontario, Canada