Re: [CR]Drilled-Out Paramount Hubs?

(Example: Production Builders:Peugeot:PX-10LE)

From: "Chuck Schmidt" <chuckschmidt@earthlink.net>
To: classicrendezvous@bikelist.org
Subject: Re: [CR]Drilled-Out Paramount Hubs?
References: <133.16a1cb43.2aec2830@aol.com>
Date: Sat, 26 Oct 2002 10:58:56 -0700

KEN TODA wrote:
>
> In a message dated 10/25/02 11:59:17 PM, d.kennard@adelphia.net writes:
>
> << http://www.duane.kennard.com/drilledhubs.jpg >>
>
> Another thing is interesting to me, that the Q/R skewer lever were BENT by
> probably Schwinn. It is obvious there is no LOCKED/UNLOCKED stamping on
> them as CPSC lever after 1978. The safety idea was 6-7 years ahead.

Check the end of this Campagnolo Timeline entry:

"1967 Catalog #15 is printed for the year-end trade shows. Included for the Record group is the Nuovo Record alloy rear derailleur and the Nuovo Record bottom bracket (rifled axle aperture cups). Also the triple chainring crank and cyclocross flanged-chainring crank, the Nuovo Tipo small and large flange hubs (round holes in flanges, no oil hole and stamped steel races), Record pedals (name change), a new Record headset, the Valentino group, pedal spanner (15-16-17mm multiple head), portable repair stand, and the obscure large flange track hubs with curved lever quick releases."

Chuck Schmidt SoPas, SoCal http://www.velo-retro.com (Campagnolo Timeline)

.