Re: [CR]18 tooth 1st postion cog

(Example: Framebuilders:Tony Beek)

From: "Olof Stroh" <olof.stroh@hem.utfors.se>
To: <Wdgadd@aol.com>, <jswan@optonline.net>, <classicrendezvous@bikelist.org>
References: <bc.316db228.2b3b38d1@aol.com>
Subject: Re: [CR]18 tooth 1st postion cog
Date: Wed, 25 Dec 2002 18:45:57 +0100

As I remember from Sweden in the 70s the limit was 86.4 which is 48/15, did not restrict some juniors from being quite fast. I also remember a 16t cog as common smallest for boys, 18t may well have been used for younger boys. But all this is guesses and the US may vary.

have a peaceful xmas

Olof Stroh
Uppsala Sweden


----- Original Message -----
From: Wdgadd@aol.com
To: jswan@optonline.net
Sent: Wednesday, December 25, 2002 5:37 PM
Subject: Re: [CR]18 tooth 1st postion cog



>
> In a message dated 12/24/02 4:33:09 PM, jswan@optonline.net writes:
>
> << A Junior who is required to ride on restricted gears. >>
>
> As I remember, the limit was a 96" top; most riders used a 52 or 53 x 15
> (I think -that was a while ago!). I still have a 15-19 five speed SunTour
> block from those days. To check, I remember officials "rolling out" bikes. Is
> this still in effect? I don't think there was any restriction prior to about
> 1975.
>
> Best regards,
> Wes Gadd
> Unionville,CT