[CR]campagnolo 2 bolt seat post design/removal

(Example: Component Manufacturers)

Subject: [CR]campagnolo 2 bolt seat post design/removal
From: "Pete Imandt" <imandt@earthlink.net>
To: <classicrendezvous@bikelist.org>, Kevin Gregor <kevin@audiobahn.com>
Date: Mon, 02 Dec 2002 10:57:59 -0800


To remove, there's no need to loosen both bolts with a wrench -- just really loosen the rear bolt and the front one will slack as the clamp assembly pivots naturally. Before I got my Campy wrench, to adjust I used a standard wrench on the rear bolt after setting the front one with finger pressure -- it's slow, but it works. However, there's a comfortable feeling of max mojo using the Campy wrench. Also, on the opposite end, the Campy item fits the adjusting nut on Brooks saddles.

Haven't there been previous comments about the simpatico between Campy and Brooks (and others)?

Pete Imandt Ramona, Sunny SoCal