[CR]Re: Modified Parts - Freewheel

(Example: Racing:Wayne Stetina)

In-Reply-To: <010701c2bdde$a6802300$c7830944@ri.cox.net>
References: <6557651.1042657391706.JavaMail.monkeylad@mac.com> <p05200f62ba4d29b71147@[10.0.1.31]>
Date: Fri, 17 Jan 2003 00:28:21 -0500
To: "Dan Kasha" <kasha.lists@cox.net>, <classicrendezvous@bikelist.org>
From: "Sheldon Brown" <CaptBike@sheldonbrown.com>
Subject: [CR]Re: Modified Parts - Freewheel

Dan Kasha wrote:
>OK, so I have to ask. Why did they put that groove in the tops
>of the teeth? My chain zzzzing'ed on me the other day and it is
>not a nice thing to have happen.

My surmise was that this was done with the hope that it would improve shifting, but that it didn't work. Similar to the dimples on the sides of Rigida rims that were intended to improve wet braking...but didn't. The designs of many bike parts back then were based on what seemed like a good idea to somebody in authority, rather than being based on actual r & d.

I should mention that I got the basic idea of doing this from looking at the teeth on SunTour freewheels, which shifted WAY better than Euro freewheels of the day.
>Is there a chain that will be
>less likely to do this (I am running the modern sram chain)?

We've got some ancient NOS Wipperman (Made in "West Germany") chains that might be a bit better for this sort of application.
>Also, I thought the cogs are hardened steel, but I could be
>wrong on this one.

No, they're very good steel, very well hardened.
>Wouldn't grinding them hurt the hardening
>if they are?

Not if you do it right. I'd mostly do a quick "bzzzzzt bzzzzzzt bzzzzzt" on each tooth in turn, very quick with a fair amount of pressure, then let them cool (or quench them) before grinding any more off, if a second pass was needed. After the first few I got a pretty good feel for it. You can tell if you overheat it by to change in color.
>I think I am off to buy a grinding wheel.

A good bench grinder is a very, very useful tool.

Sheldon "Abrasive" Brown +---------------------------------------------------+ | The important thing is not to stop questioning. | | Curiosity has its own reason for existing. | | --Albert Einstein | +---------------------------------------------------+ --
    Harris Cyclery, West Newton, Massachusetts
       Phone 617-244-9772 FAX 617-244-1041
            http://harriscyclery.com
       Hard-to-find parts shipped Worldwide
            http://captainbike.com
    Useful articles about bicycles and cycling
            http://sheldonbrown.com