Re: [CR]Re: Confente

(Example: Production Builders)

Date: Mon, 20 Jan 2003 15:07:38 -0700
From: "Chuck Schmidt" <chuckschmidt@earthlink.net>
To: classicrendezvous@bikelist.org
Subject: Re: [CR]Re: Confente
References: <153.1aa1a143.2b5dd68c@aol.com>


Bob Hovey wrote:
>
> In a message dated 1/19/03 10:11:34 PM, Jim Cunningham writes:
>
> << Here is a link to photos of the bike as received. More photos after
> we've cleaned and touched it up. If you can, please stop by CyclArt to
> see this beauty.
>
> http://www.cyclart.com/photos/Confente/ (mapped) >>
>
> Dear Jim;
>
> Would really like to see some more photos! I would especially like how Mario
> did the rear derailleur cable... in one pic it is routed around the bottom
> bracket and goes out of the picture still under the chainstay... in another
> picture it pops out on top of the chainstay.

Not sure if you are asking how it was done Bob but if you were: There is a machined tube brazed through the chainstay that has a stepped configuration inside. Upper part of tube is the size of the cable housing and the lower part is the size of the derailleur cable so it acts as a cable housing stop. Very clean.

Interesting story and a little name dropping: Eddy Merckx saw this feature, shook his head and said, "No good." I asked why and he said this would rust in Belgium.

My take... On the runways in Milano they have a saying, "You have to willing to suffer for fashion!"

Chuck "fashion challenged" Schmidt SoPas, SoCal

.