Re: [CR]Stroglight 49D rings

(Example: Component Manufacturers:Ideale)

From: Jerry & Liz Moos <jerrymoos@sbcglobal.net>
To: "Chris Van Scoyk" <parisbrest@mchsi.com>, <Classicrendezvous@bikelist.org>
References: <013201c2c23a$b887e280$3479d80c@mchsi.com>
Subject: Re: [CR]Stroglight 49D rings
Date: Sat, 25 Jan 2003 12:24:26 -0600


Chris, you don't say if you are looking for inner ring, outer ring, or both. The mod 49 inner rings are 122mm bolt circle, and are the same ones used for mod 93, 105 and many other Stronglight models. If you can't find a mod 49 outer ring, you can use TA Cyclotourist rings which are still manufactured. The only catch is, you'll have to use a TA inner ring as well, as the bolt circle of the inner TA rings, which like the Stronglight mod 49, bolt to the outer ring, is smaller than the mod 49 inner circle. I suspect a lot of bikes in the classic era had mod 49 arms with TA rings, as TA rings were widely available, and had a wide selection of ring sizes.

Regards,

Jerry Moos


----- Original Message -----
From: Chris Van Scoyk
To: Classicrendezvous@bikelist.org
Sent: Wednesday, January 22, 2003 11:21 AM
Subject: [CR]Stroglight 49D rings


Does anyone have, or know where I can find chainrings for the Stronglight 49 D Crank. I've been looking for a long time, I think it could be a futile search.

Chris Van Scoyk
Freezing in Ankeny Iowa