[CR]Re: Classicrendezvous Digest, Vol 3, Issue 51

(Example: Production Builders)

Date: Mon, 10 Mar 2003 11:30:59 -0500
From: <Brichnlucky@aol.com>
To: classicrendezvous@bikelist.org
Subject: [CR]Re: Classicrendezvous Digest, Vol 3, Issue 51

> > I want to re-tap French threaded Mod 93 cranks to English....... It was suggested to run the tap from the backside of the crankarm. Why would this be?
>
> I think your results will be best if you pre-drill or ream the hole first to a proper base ID for the 9/16" x 20tpi English tap

NO no no !! Pedal taps have the ream built into them. Do not enlarge the hole with a ream or a drill...that will only lead to failure.

Brad Luecke
Columbia MO