Re: [CR]Seeking 12 or 13 vintage stem; Raleigh Pro report; Campy bar-ends question

(Example: Events)

Date: Tue, 15 Apr 2003 08:29:52 -0400
From: "Daniel Artley" <dartley@co.ba.md.us>
To: <classicrendezvous@bikelist.org>
Subject: Re: [CR]Seeking 12 or 13 vintage stem; Raleigh Pro report; Campy bar-ends question


<<<PBridge130@aol.com> 04/15/03 12:53AM >>> Oops.... set the bar-ends up with modern teflon housing. Is it true that the stainless steel spring housing is no longer to be had?>>>

The Steel spring housing didn't hold any grease or other lubricant. I tossed 'em way back when the cables first stiffened up.

<<<Curious -- are all vintage Campy bar-ends non-symmetrical? Right identical to left, screw goes through both from the same side, lock nuts thread on both from the same side? I'd never set up Campy bar-ends before. I got a huge kick out of the fact that a T wrench socket fits snugly into the recess where the 8mm locknut lives. Cheers, Peter Bridge The Mile High City, CO>>>

Yeah, screw on the right, nut on the left. Just put the nicer looking nut on the outer left side of the handlebar. The chrome always seems to peel off on them.

Dan Artley
Parkton, Maryland