[CR]Parts for sale

Example: Production Builders

From: "Pete Paine" <petebike7@btopenworld.com>
To: <classicrendezvous@bikelist.org>
Date: Tue, 22 Jul 2003 17:11:16 +0100
Subject: [CR]Parts for sale

Hello All I have the following parts for sale all plus shipping

1/ GB touring bars 40mm ctc. these are a very shallow bend with a center ferule , quite hard to find , need a clean $65

2/Relolds clip type steel stem NOS. 2 inch A little shop worn with a couple of small rust spots $45

3/Raleigh lenton pedals used but unworn $35

4/ Mafac dural forge Racers bronze bush type. Used but good condition with levers and hoods. need a polish $85

5/ Birmalux seat pin NOS 27.2. A little shop worn $20

6/Major Taylor stem Used with some lght surface rust. should replate really well $50

7/ Cinelli 1a stem 110mm used but good , oval logo $30

8/ Pennine CO2 pump good. $25

9/GB Hiduminiums with cast superhood levers. need a polish good condition $120

10/ Campagnolo seatpin 27mm good condition but with a little light rust on the clamp parts $40

11/ 130mm steel tandem stem , used but chrome a bit worn. very nice quality $35

12/ Simplex front lever shifter, alloy acorn type . very useable but chrome not great with some rust comes with good spare lever. $55

13/ GB stem early type (late 1940s) 40mm tidy $30

14/ Sturmey Archer black master catalog c 1957 very clean and tidy $75

15/ Simplex down tube Stainless steel bottle cage with REG Milano/ San Remo bottle used . $25

If you need any more info please contact me off list

Cheers Pete