Re: [CR]Paramount hub pull-apart, was Help Needed :Disassembling 3 piece

(Example: Framebuilding:Paint)

From: "Stephen Barner" <steve@sburl.com>
To: <classicrendezvous@bikelist.org>
References: <CATFOODDwbHMARNoQY900001bce@catfood.nt.phred.org>
Subject: Re: [CR]Paramount hub pull-apart, was Help Needed :Disassembling 3 piece
Date: Fri, 25 Jul 2003 12:20:34 -0400


You can increment that sample by one. I have a pair of Paramount track hubs here that have the right rear flange threaded onto the cog threads. The left flange looks to be pressed on, though one can't really tell by looking at it. I have no idea what the year of manufacture is.

Steve Barner, Bolton, Vermont


----- Original Message -----


> Date: Thu, 24 Jul 2003 21:18:15 -0400
> From: HM & SS Sachs <sachs@erols.com>
> To: classicrendezvous@bikelist.org
> Cc: chuckschmidt@earthlink.net
> Cc: JBender-Zanoni@fishneave.com
> Subject: [CR]Paramount hub pull-apart, was Help Needed :Disassembling 3 piece
> ---Snip---
>
> I have a disassembled Paramount HF rear hub, steel barrel w. aluminum flanges. The right flange has the same threading as the FW or fixed cog. The left is press-fit, so it can be properly aligned after the right is mounted.
>
> Extrapolating from a sample of one is at the user's own risk...

>

> harvey sachs

> mcLean va