Re: [CR]Campy rear hub widths

From: "Peter Jon White" <>
To: <>, <>
References: <>
Subject: Re: [CR]Campy rear hub widths
Date: Sat, 6 Sep 2003 09:07:40 -0400

I think the 122mm width was to accomodate the "Ultra 6" Suntour freewheels. I don't recal a 125mm hub width, and I can't think of a reason for one. It sounds like this frame is just a bit off in alignment. But 1mm isn't enough to bother with. Just put a 126 hub in it.

Peter Jon White Peter White Cycles 24 Hall Rd. Hillsborough, NH 03244 603 478 0900 Phone 603 478 0902 Phax

----- Original Message -----
From: "Greg Brooks"
Sent: Saturday, September 06, 2003 9:01 AM
Subject: [CR]Campy rear hub widths

> Hi all,
> I know Campy NR/SR rear hubs have been available in 120mm,122mm,126mm widths, but were they ever made in 125mm? I recently snagged a nice Harry Quinn frame the owner said had a reardropout width of 125mm, and it does. I know I'll be able to make a 126mm hub work, but this 125 measurent is new to me. If there are 125mm hubs & one of ya'll have one in your secret horde of stuff you would be willing to sell, please let me know. Thanks, Greg Brooks,Ridgetop,TN
> P.S. Why were there so many close widths anyway? I realize going from 5 to 6 to 7 cog freewheels requires greater widths. But 120,122,125,126,128,130 is a lot of variation.