[CR]Items for Sale

(Example: Racing:Beryl Burton)

From: "Doug Smith" <doug@kingsweir.plus.com>
To: <classicrendezvous@bikelist.org>
Date: Fri, 19 Sep 2003 20:14:44 +0100
Subject: [CR]Items for Sale

To listing members the following items are for sale:-

New Nicklin steel cottered 6 1/2" cranked single chainset with 3/32" 48 steel tooth ring . This set is a 3 pin Williiams look alike the chrome finish is in perfect condition slight fluted cranks with the engraved Nickel logo. Also included a spare new 3/32" 47 tooth ring. The older Williams chainrings also fit these cranks. Cost £25-00 GBP.

An unamed steel cottered larger fluted chainset with 3 pin 7" cranks and single steel1/8" tooth ring. Although rather heavier than the usual type of the era this chromed finished set is in perfect condition. This set also comes with a spare 1/8th. 50 tooth chain ring. Cost £25-00 GBP.

A pair of 1984 Pelisser "Excelto" quick release 36 hole large flange hubs with sealed bearings. The spacing on the rear hub is at 125mm. and single sided thread takes up to a 6 speed freewheel. The original rear skewer is missing but with incorrect replacement . These hubs have been used but are in very good condition. Cost £20-00 GBP

A pair of early 1980's Shimano quick release 36 hole large flange hubs. The spacing on the rear hub is at 125mm and single sided thread takes up to a 6 speed freewheel. These hubs are in excellent condition and have been built up but show no signs of excessive wear and tear. Cost £25-00 GBP.

Shipping and posting is extra on above prices at cost. Payment in GBP or American Travellers Cheques/Money orders

Pictures available on all above items.Please contact off listing.

Thank you

Doug.Smith

North Dorset

United Kingdom