[CR]Super Record Ball Size

(Example: Production Builders:Frejus)

Date: Tue, 23 Sep 2003 07:39:10 -0700 (PDT)
From: "Tom Dalton" <tom_s_dalton@yahoo.com>
To: chasds@mindspring.com
cc: classicrendezvous@bikelist.org
Subject: [CR]Super Record Ball Size

Charles,

The later SR BB with the solid axle used the same alloy cups and 3/16" balls. These cups and bearings were retained for the early C-record BB. At some point Campy realized that big balls are better, when it comes to durability, and they changed the entire C-record BB to use 7/32" balls. I suppose this was as big as they could go while still using the alloy cup with steel insert, since that is bulkier than an all-steel construction.

FWIW, Campy also had an old all-steel (late 1960's?) Record BB that used 3/16" balls. I have a spindle that is marked (something like) "per sphere 3/16" " I recently determined that the old Record BB that uses 3/16" balls is not interchangeable with the later 3/16" SR / early C-rec stuff. The old Record BB used thin-walled cups and had wider spacing between the races on the axle.

Tom Dalton

Bethlehem, PA

---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software