[CR]vitus 979


Example: Framebuilders:Chris Pauley

From: "Steve Clark" <steve@sjscycles.com>
To: <classicrendezvous@bikelist.org>
Date: Fri, 24 Oct 2003 16:40:17 +0100
Subject: [CR]vitus 979

Sirs, I would agree with Sam about Vitus 979 frames,when I worked at "Bike Tech" Bristol in the 80's we sold quite a few Vitus 979 frames and the carbon version,we did get quite a few breakages! We had Sean Kellys' Paris-Roubaix winning 979 on show once which atracted the crowds,we examined the frame closely,not only had it different dimensions and angles than a "standard" frame,it also had steel reinforcement inserts at the bottom bracket/seat/down tube and along the chainstays!These were added we think,in order to give the frame some stiffness for Kellys strength over the cobbles!

Steve Clarke St John St Cycles 91-93 St John Street Bridgwater Somerset TA6 5HX

Tel: 01278-441542 (Int ++44-1278-441544) Fax: 01278 431107 (Int ++44-1278-431107)

<mailto:ebay@sjscycles.com> mailto:steve@sjscycles.com http://www.sjscycles.com/ http://www.sjscycles.com

The information contained in this message may be confidential and is intended for the addressee only. Any unauthorised use, dissemination of the information, or copying of this message is prohibited. If you are not the addressee, please notify the sender immediately by return email and delete this message.

The views expressed in this email are not that of the organisation unless specified within the message.

Although this e-mail and any attachments are believed to be free of any virus, or other defect which might affect any computer or system into which they are received and opened, it is the responsibility of the recipient to ensure that they are virus free and no responsibility is accepted by St John St Cycles for any loss or damage from receipt or use thereof.