[CR]Re: Junior Racer for Lynn Miller


Example: Production Builders:Peugeot:PX-10LE

From: "P. Lynn Miller" <lynnmiller@optusnet.com.au>
To: "Joe Bender-Zanoni" <joebz@optonline.net>
References: <BBC73DE8.2111B%hilary.stone@blueyonder.co.uk> <01dc01c39f62$4f0588c0$0200a8c0@admin> <00db01c39f68$edfe7f80$6400a8c0@jfbender>
Date: Fri, 31 Oct 2003 17:33:26 +1100
cc: Classic Rendezvous <classicrendezvous@bikelist.org>
Subject: [CR]Re: Junior Racer for Lynn Miller

Joe,

I am humbled by the mass appeal to help me with finding this bike. Thank you.

Instead of being so concerned with wheel diameter, here are the important measurements of my son at the moment -

Standover Height - 21" Shoulder Height - 36" Arm Length(should to web of thumb) - 16"

It may be that a 24" bike will fit as well as a 20". So any input from anyone from those measurements would be appreciated.

Thank you,

P. Lynn Miller
Sydney, Australia


----- Original Message -----
From: "Joe Bender-Zanoni"
To: "P. Lynn Miller" ; "Classic Rendezvous"


<classicrendezvous@bikelist.org> Sent: Friday, October 31, 2003 3:39 PM Subject: Junior Racer for Lynn Miller


> I think collectively we should be able to find something. Lynn's budget is
> reasonable with shipping (especially since a small bike will squeeze down
> for postal rates. Keep your eyes out CR folks!
>
> I would say that a good 20" wheeled bike is much tougher than a 24".
>
> Has anyone seen the lovely Fuji 24" racers? They not only made a regular
> model but also a "Pro" model. I suspect they sold about 10 of those.
>
> Joe Bender-Zanoni
> Great Notch, NJ