Dear Craig:
Here is an ended eBay auction for the widget you want. It just ended with no sale because the $12 bid didn't meet the reserve. It had a buy it now price of $99, which seems high to me but you can never tell. I haven't seen these for sale that often. Not too many of the AX cranks were bought and the production life was short, so I don't know how many of these are out there. You might want to call the seller and see what he wants for them.
Tom Adams, Shrewsbury NJ
>From: "Craig Fenstermaker"
>To:
>Subject: [CR]dura ace AX pedal threading conversion??????????????????????????????
>Date: Mon, 17 Nov 2003 11:49:58 -0800
>
>hi
>i've recently built a sweet 3 rensho with a DA ax grouppo.
>as with most vintage bikes i own, i prefer to ride using a modern pedal system to keep my knees happy.
>but
>the DA cranks use an oversize, ( at least when compared with 9/16" X 24 ), thread.
>
>i could fab an adapter to use different pedals,
>but
>that would take a bit of time and i'm sure that this has been done before??????????????
>
>anyone know of a commercially available adapter for this application?
>specifically one that will allow the use of a 9/16" X 24 tpi pedal in a DA ex crank.
>
>thank you
>
>craig g. fenstermaker
>ams gynecology, ( formerly cryogen inc.)
>10805 vista sorrento parkway
>san diego, ca 92121
>858.450.7405 voice
>858.775.0858 mobile
>858.450.3417 fax
>
>_______________________________________________
>Classicrendezvous mailing list
>Classicrendezvous@bikelist.org
>http://www.bikelist.org/mailman/listinfo/classicrendezvous
------------------------------------------
------------------------------------------
>From Beethoven to the Rolling Stones, your favorite music is always playing on MSN Radio Plus. No ads, no talk. Trial month FREE!
------------------------------------------
------------------------------------------
_______________________________________________
Classicrendezvous mailing list
Classicrendezvous@bikelist.org
http://www.bikelist.org/