WOW indeed
the outpouring of helpful information on this subject made me smile, (and my email box fill quickly). at last count 19 people offered help.
Please accept my thanks for your help
if anyone else is looking for these please see
thanks tom adams
best regards
craig g. fenstermaker ams gynecology, ( formerly cryogen inc.) 10805 vista sorrento parkway san diego, ca 92121 858.450.7405 voice 858.775.0858 mobile 858.450.3417 fax
hi i've recently built a sweet 3 rensho with a DA ax grouppo. as with most vintage bikes i own, i prefer to ride using a modern pedal system to keep my knees happy. but the DA cranks use an oversize, ( at least when compared with 9/16" X 24 ), thread.
i could fab an adapter to use different pedals, but that would take a bit of time and i'm sure that this has been done before??????????????
anyone know of a commercially available adapter for this application? specifically one that will allow the use of a 9/16" X 24 tpi pedal in a DA ex crank.
thank you
craig g. fenstermaker ams gynecology, ( formerly cryogen inc.) 10805 vista sorrento parkway san diego, ca 92121 858.450.7405 voice 858.775.0858 mobile 858.450.3417 fax
------------------------------
_______________________________________________
End of Classicrendezvous Digest, Vol 11, Issue 70 *************************************************