From: Mark Stevens <mountgerald@btopenworld.com>
To: <classicrendezvous@bikelist.org>
References: <CATFOODtSB2qgrZCThX0000159a@catfood.nt.phred.org>
Date: Sat, 22 Nov 2003 22:20:52 -0000
Subject: [CR]Cinelli headbadge
These would be made by acid etching. The shape would be stamped out then
screenprinted with a tar like substance which resists the acid. Hence the
slight depression. Some manufacturers would then use enamels fired onto the
brass, Cinelli used paint. Mark. Dingwall. Scotland