Re: [CR]Put the lime in the coconut and drill the Campy crank...

(Example: Racing:Jean Robic)

From: <NortonMarg@aol.com>
Date: Sat, 15 Nov 2003 01:02:50 EST
Subject: Re: [CR]Put the lime in the coconut and drill the Campy crank...
To: mpetry@bainbridgeisland.net, classicrendezvous@bikelist.org


In a message dated 11/14/03 4:47:17 PM Pacific Standard Time, mpetry@bainbridgeisland.net writes:
> If you need gears lower than you can get with a Campy 42-28, may I
> suggest that you consider a set of TA cranks which are period correct
> for most classic bikes and readily available ? While they would not
> look right on a Masi or Pogliaghi, they are an excellent solution that
> provides lower gears while keeping the vintage spirit intact.
>

Another option: Ed Litton knows where there is a fixture to drill Campagnolo cranks to accept a third ring. You can go down to a 36 and it will still work with a Nuovo Record front derailleur. He will shortly be able to do this drilling for you (I might add, he did a LOT of them, "back then") If you need more chain take up on the rear, you can bolt on a pair of Rally cage plates. A T.A. crank will let you use a smaller inner chainring, but you will need to find a different front derailleur.
Stevan Thomas
Alameda., CA