Re: [CR]Paris Roubaix gear and frame

(Example: Framebuilders:Rene Herse)

From: <themaaslands@comcast.net>
To: Classicrendezvous@bikelist.org (Classic Rendezvous)
Subject: Re: [CR]Paris Roubaix gear and frame
Date: Mon, 08 Dec 2003 02:40:45 +0000

About my earlier post regarding:

http://ebay.com/<blah>

I forgot to mention that this is most likely a true Cimatti bike. They were based out of Bologna and sponsored a pro team for quite a few years. They are actually better than average for the period. There is at least one other Cambio Corsa-equipped Cimatti in the country. I am happy to say that it belongs to a listmember.

--
Steven Maasland
Moorestown, NJ

> I take that it is Dave Schnakenberg who is offering up a no-name frame with a

> Paris Roubaix gear on ebay:

>

> http://ebay.com/<blah>

>

> It seems like quite a good opportunity, however I would like to point out that

> this frame was not meant to be used with a Paris Roubaix gear. It was designed

> solely with the use of a Cambio Corsa gear in mind. This can be seen by the fact

> that the drop-outs have 17 teeth instead of the 19 used for bikes built for use

> the Paris-Roubaix gear system. You could perhaps run into problems if you want

> to put a 5th cog onto the bike.

>

> --

> Steven Maasland

> Moorestown, NJ