Re: Fw: [CR] Campy Delta hex key size 3.5? Plug for Beta tools,

(Example: Framebuilding:Paint)

From: "Renaissance-Cycles" <info@renaissance-cycles.com>
To: "Mark Bulgier" <mark@bulgier.net>, <classicrendezvous@bikelist.org>
References: <C102531FB711D411B5B90060B0A468760DB124@mail.bulgier.net>
Subject: Re: Fw: [CR] Campy Delta hex key size 3.5? Plug for Beta tools,
Date: Tue, 4 Mar 2003 17:33:41 +0100


Hey all!

3.5 Allen keys are available through http://www.beta-tools.com They come in sets and singles! When going to the site go th wrenchs and scroll down. When moving Renaissance cycles Stateside we will be towing Beta along for the ride.

3.5 Hex key ( Hexogon key wrenchs! ) are offered with these sets, single keys are listed on the right side From top to bottom it goes from $$$ to $! Due note: There will be a 20% discount on set prices, this discount will come off of the list prices. Any interest, let me know.

# 951/S14 $ 256.-...............................Single key # 951, 3.5........$ 14.74 # 96T/SP11 $ 123.-.............................Single key # 96T, 3.5.......$ 9.50 # 96LM/SP10 $ 81.-...........................Single key # 96LM, 3.5....$ 6.75 #96LC/SP12 $ 34.-, LONG KEY.......Single key # 96LC, 3.5....$ 1.75 #96L/SP12 $ 26.-, LONG KEY..........Single key # 96L, 3.5....$ $ 1.25 # 96/SP12 $ 19.50, Short key # 96NSP12 $ 14.-, short key

Tool JUNKIES!,............enjoy! We hope to have this offering available sometime soon!

BC Baron C...................And the gang!! Renaissance cycles, Eindhoven, Holland.


----- Original Message -----
From: Mark Bulgier
To: classicrendezvous@bikelist.org
Sent: Sunday, March 02, 2003 9:32 PM
Subject: RE: Fw: [CR] Campy Delta hex key size [was: Modolo Superprestige]



>
>
> Martin Appel wrote:
> >
> > (btw, the smaller one is a 2.5mm... isn't
> > that the same size the Campa Delta's require?)
>
> I'm no Delta expert, but I know at least some iterations of Deltas took a
> 3.5 mm hex key - a very rare size, not included in any set of hex keys I've
> ever seen. Rather an annoyance; anyone who has Deltas or works on them
> needs to hoard any 3.5 mm wrench they can find.
>
> 2.5 mm is a common size, but I doubt it was ever used as the cable clamp on
> Deltas - too small to give the required gripping force for a brake cable I
> would think.
>
> Mark Bulgier
> Seattle, Wa
> USA