Re: [CR]Universal 68 questions

(Example: Production Builders:LeJeune)

From: <NortonMarg@aol.com>
Date: Fri, 20 Jun 2003 01:53:43 EDT
Subject: Re: [CR]Universal 68 questions
To: Tonythreerings@aol.com, classicrendezvous@bikelist.org


In a message dated 6/19/03 8:03:15 PM Pacific Daylight Time, Tonythreerings@aol.com writes:


> Any tips on centering Universal 68s?
>

Lacking a special tool, we used to set a screw driver on the spring, about where the loop is or wherever works for you, and give it a tap with a hammer. Crude but effective. It's a good idea to grease the pivots and do a careful adjustment of the gap between the arms, then a wee drop of oil where the spring contacts the caliper arm. They're always dry and they work better lubed, just like everything
else.
Stevan Thomas
Alameda, CA