Re: [CR]Re: Nervar Puller--Stronglight=TA?

(Example: Production Builders:Tonard)

Date: Sun, 22 Jun 2003 12:00:28 -0700
Subject: Re: [CR]Re: Nervar Puller--Stronglight=TA?
To: jerrymoos <>
From: "Brandon Ives" <>
In-Reply-To: <05cb01c338ed$c01b11f0$efddfea9@mooshome>
cc: mitch harris <>
cc: mitch harris

Just to add to Jerry's post, many Stronglight cranks have had their threads pulled out in the past. Even if this has happened using the correct extractor can still remove the crank later on in many cases. I used to have quite a few pair of "stripped" cranks that were given to me. The key to removing a "stripped" crank is to thread the extractor all the way to the bottom of the crankarm threads. ciao, Brandon"monkeyman"Ives SB, CA

On Sunday, June 22, 2003, at 11:40 AM, jerrymoos wrote:
> No, Standard extractor thread is 22mm. TA Cyclotourist is 23mm. Old
> pre-1982 Stronglight was 23.35mm. The older double-ended Park
> extractors
> were 22mm on one end, 23mm for TA on the other. Unfortunately, a lot
> of
> people tried using the 23mm end on Stronglight. If they were lucky
> and the
> crank arm wasn't on too tight they got away with it, but a lot of
> Stronglight cranks were also ruined that way. For TA, get a proper
> 23mm
> extractor. Sheldon Brown and several others on the list sell them.
> By the
> way, Stronglight cranks made after about 1982 use standard 22mm
> extractor
> thread.
> Regards,
> Jerry Moos
> ----- Original Message -----
> From: "mitch harris" <>
> To: <>; <>
> Sent: Sunday, June 22, 2003 11:03 AM
> Subject: Nervar Puller--Stronglight=TA?
>> Thanks for the info on Nervar. You mention that TA and Stronglight use
>> non-strandard extractor; by any chance, is it the same non-standard
>> one?
> Can
>> I use my Stronglight extractor on a TA Cyclotourist Crank?
>> Thanks,
>> Mitch Harris
>> Utah Co., UT
>> "Sorry for the very late response. You probably have found the answer
>> already, but Sutherlands 3rd Edition (1980) lists Nervar as using the
>> Standard (Campy NR type) extractor. In that edition, the only cranks
>> Sutherland's lists as using non-Standard extractors are TA,
>> Stronglight
> and
>> early Lambert.
>> Regards,
>> Jerry Moos
>> Houston, TX"
>> _________________________________________________________________
> _______________________________________________
> ++++++++++++++++++ "Sine coffea nihil sum."
        --Sarah Vowell-- ++++++++++++++++++