[CR]Wheel Building advice sought

Example: Framebuilders:Chris Pauley
From: "jerrymoos" <jerrymoos@sbcglobal.net>
To: <classicrendezvous@bikelist.org>
References: <a0501040cbb1d39f6d01a@[]>
Date: Mon, 23 Jun 2003 19:01:06 -0500
Subject: [CR]Wheel Building advice sought

OK, all you expert wheel builders, I'm planning to build two sets of wheels, one for a Caygill, one for a new Bates. Using Phil Wood hubs (126 rear, 48mm flanges) in both cases. Rims will be 36 hole Mavic MA-2 or maybe one set Ambrosio Gentleman. Sutherlands says the proper spoke length is about 303mm for 4X or 295mm for 3X on the MA-2. They don't list the Ambrosio Gentleman, but it seems pretty similar. Anyone have different advise? I'm partial to 4X, but would anyone recommend against this for this hub/rim combination? Finally, anyone know of a really cheap source for DT 14/15 butted spokes? The best I've found so far is Lickton's at $11 per package of 20.


Jerry Moos
Houston, TX