Steven,
Another little known fact about this wonderful tool. Works really well to rap the knuckles of your framebuilding students when they muck up some lugs or make a crappy braze joint.
Brian Baylis
La Mesa, CA
> The full Campagnolo Tool Case contains Tool "G" (a 50cm x 2.5cm steel
> straightedge with a 1cm diameter hole at each end) which Catalog 17 says
> is "Straight edge for the alignment of the rudder pedals". (Catalog 18
> says the same thing.)
A more correct translation of the original Italian text would be:
"Bar for the verification of the alignment of the pedalarms with the freewheel and the inclination of the drop-outs."
--
Steven Maasland
Moorestown, NJ
> The full Campagnolo Tool Case contains Tool "G" (a 50cm x 2.5cm steel
> straightedge with a 1cm diameter hole at each end) which Catalog 17 says
> is "Straight edge for the alignment of the rudder pedals". (Catalog 18
> says the same thing.)
>
> OK, Guys and Gals... what are "rudder pedals"?
>
>
> Lee Berg
> Palo Alto, CA