I've got an old Peugeot PX-10 project. I'm slowly acquiring roughly period-correct parts to put it back on the road. It will be a rough approximation of its original state because I am no kauzo.
I have what I believe to be the original seatpost. You can see it in this pic:
http://www.birfield.com/
Here are some pics of the bike before it was parted out:
http://www.birfield.com/
With a dial caliper I measure the seatpost to be 1.033", or 26.2mm. I measure the ID of the seat tube at its widest (perpendicular to the frame's centerline) to be 1.039", or 26.4mm. What size seatpost do I need? (It's not in Sheldon's seatpost size db.) I think the answer is 26.2mm. If so, anyone have one of those pretty Simplex seatposts they'd sell, in that size?
Also, I am looking for a headbadge. You can see what it looked like here:
http://www.classicrendezvous.com/
This is what I've got:
http://www.birfield.com/
And while I'm begging, I need a pair of roughly period-correct:
wheels Ideale saddle period-correct english-thread pedals (have 49D cranks with english threads) long (12-13cm) french stem - does such a thing exist?
Would also - in my dreams - like a pair of lefol fenders.
Thanks,
Morgan Fletcher
Oakland, CA