Re: [CR]More on Zeus Metric Hubs......

Example: Production Builders:Peugeot

From: "jerrymoos" <>
To: <>, <>
References: <>
Subject: Re: [CR]More on Zeus Metric Hubs......
Date: Sat, 21 Feb 2004 19:24:22 -0600

That is the best test. If a French FW will not go on without undue force, and an English FW goes on snug without slop, then use the English. Don't think this will normally be the case with Zeus Metric hubs, though. I have a bunch of Zeus Metric hubs I recently bought from Baron and Cecile, maybe I should try them to see.


Jerry Moos
Houston, TX

----- Original Message -----
To: ; ;

<> Sent: Saturday, February 21, 2004 7:03 PM Subject: Re: [CR]More on Zeus Metric Hubs......

> In a message dated 2/21/04 5:39:58 PM, writes:
> << if the hub is not marked BSC, and the package is marked "Metric", it is a
> 90%
> probability that installing and riding an English FW will ruin that hub.
> Get a French FW and try to install it. If it goes on without undue force,
> that is the proper FW. Leave it on or replace it with another French FW.
> Jerry,
> I went and dug out a French freewheel and it fits just fine on the Normandy
> hub, but will not thread onto the Zeus. I also tried the freewheel on a
> Suntour hub, and it would not thread onto this hub as well. The Zeus hub is not
> marked BSC, so if anyone else has these 'Metric' marked Zeus hubs, it may be
> prudent to test them in your hand before taking to the streets.
> Cheers,
> Chuck Brooks
> Malta, NY