RE: [CR]Penetrating Oil

(Example: Racing:Jean Robic)

From: "James M. Kerr" <jim-kerr@comcast.net>
To: "jerrymoos" <jerrymoos@sbcglobal.net>, "James M. Kerr" <jim-kerr@comcast.net>, "Fred Rafael Rednor" <fred_rednor@yahoo.com>, <classicrendezvous@bikelist.org>
Subject: RE: [CR]Penetrating Oil
Date: Sun, 7 Mar 2004 20:12:00 -0500
In-reply-to: <1ac401c4049f$5d91e490$efddfea9@mooshome>


Jerry,

I guess I had better spring for a later Sutherland's. I think I am stuck in the 70's.

Jim Kerr New Haven, CT

-----Original Message----- From: jerrymoos [mailto:jerrymoos@sbcglobal.net] Sent: Sunday, March 07, 2004 6:53 PM To: James M. Kerr; Fred Rafael Rednor; classicrendezvous@bikelist.org Subject: Re: [CR]Penetrating Oil

Yes, but those are older Stronglight. A later Surherland's notes that Stronglight Competition has two flats, but doesn't say how to recognize Swiss thread.

Regards,

Jerry Moos
Houston, TX


----- Original Message -----
From: "James M. Kerr"
To: jerrymoos


<fred_rednor@yahoo.com>; <classicrendezvous@bikelist.org> Sent: Sunday, March 07, 2004 4:01 PM Subject: RE: [CR]Penetrating Oil


> Jerry,
>
> According to Sutherland's Second Edition on page 3-2..
>
> "STRONGLIGHT" Swiss (left thread) "no rings 8 sides"
>
> Good Luck,
>
> Jim Kerr (after a very cold and windy ride)
> New Haven, CT
>
> -----Original Message-----
> From: classicrendezvous-bounces@bikelist.org
> [mailto:classicrendezvous-bounces@bikelist.org]On Behalf Of jerrymoos
> Sent: Sunday, March 07, 2004 4:01 PM
> To: Fred Rafael Rednor; classicrendezvous@bikelist.org
> Subject: Re: [CR]Penetrating Oil
>
>
> That HS arrangement was common on Swiss bikes. I have a 1968 Allegro
> Special with the same dimensions. Makes one a bit nervous about the wall
> thickness of the steerer. Also, some French top nuts don't have clearance
> for a 22.2 stem.
>
> Anyone know how a Swiss Stronglight Competition fixed cup is marked? This
> does not have the ring code, but is marked "Stronglight France 35 x 1". I
> think Campy Swiss cups are marked 35 x 1 G, the "G" being Gauche, French for
> left, meaning left-hand thread. I guess the Swiss BB's must have been made
> in Campy's factory in France.
>
> Regards,
>
> Jerry Moos
> Houston, TX
>
> ----- Original Message -----
> From: "Fred Rafael Rednor" <fred_rednor@yahoo.com>
> To: "jerrymoos" <jerrymoos@sbcglobal.net>; <classicrendezvous@bikelist.org>
> Sent: Sunday, March 07, 2004 2:41 PM
> Subject: Re: [CR]Penetrating Oil
>
>
> > > Of course 35 x 1 could also be Swiss, but
> > > I never heard of a Swiss-threaded Peugeot.
> > Jerry,
> > I have a PGN-10 that most definitely has a Swiss threaded
> > bottom bracket. This is a 1984 model and, believe me, it
> > confused both the shop from which it was purchased and me. But
> > I doubt that it's the only Swiss threaded Peugeot in existence.
> > By the way, the headset/headtube is something of an anomaly
> > as well. That is, it's OD and threading are also definitely
> > French standard but the ID of the head tube is 22.2
> > millimeters.
> > You can't make any assumptions about French bikes, even
> > Peugeots!
> > Cheers,
> > Fred Rednor - Arlington, Virginia
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! Search - Find what you're looking for faster
> > http://search.yahoo.com