In a message dated 3/14/04 3:20:27 PM Pacific Standard Time,
freitas1@pacbell.net writes:
> I am wondering how a center pull rear cable hanger is used in
> conjunction with a allen headed fast back seat lug.I have a HURLOW
> frame and would like to use CP brakes.Fork has spacing for frt hanger
> and I think this is how the bike came but rear is big question.
>
You can substitute a longer bolt and use either a Mafac hanger or a Universal
hanger with QR and a nut on the longer bolt. You'll have to tighten the allen
bolt first to set the seat height, and then use a second wrench on the nut to
hold the hanger. You can get "thin" nuts at a hardware store if you want low
profile.
Stevan Thomas
Alameda, CA