RE: [CR]Sapim Spokes

(Example: Framebuilding:Norris Lockley)

From: "Doug Van Cleve" <dvancleve@cox.net>
To: <classicrendezvous@bikelist.org>
Subject: RE: [CR]Sapim Spokes
Date: Sat, 20 Mar 2004 12:57:41 -0700
In-Reply-To: <000301c40e9d$841612f0$6400a8c0@bourke>


Some (maybe not all) Sapims have "SAP" on the spoke elbow...

Doug Van Cleve (who just got in from a 90F 50 miler in) Chandler, AZ

-----Original Message----- From: classicrendezvous-bounces@bikelist.org [mailto:classicrendezvous-bounces@bikelist.org] On Behalf Of Stephen Barner Sent: Saturday, March 20, 2004 10:05 AM To: classicrendezvous@bikelist.org Subject: [CR]Sapim Spokes

Anyone know if Sapim spokes have any marking on their heads? I just received a set that I am intending to use to build a set of wheels for my '72 Sports Tourer, but the spokes I received, not in a box, have no markings on the heads and don't appear to be of very high quality. I can't seem to locate any photos that show the spoke heads on Sapim's or any other website.

Thanks, and I hope this is not too far off-topic.

Steve Barner, was going to head out for a ride, but then it started snowing again here in Bolton, Vermont